Giganet Category 6 UTP Pure Copper Ethernet LAN Cable
The Giganet Category 6 solid 4 pair UTP cable provides a considerable margin above all electrical transmission performance requirements and has been tested and independently verified to the highest International standards.
Specifications of Giganet Category 6 solid 4 pair UTP cable
- UTP / LSOH
- 0.57mm (0.023 in.)
- 23 AWG solid bare copper
- 6.35mm (0.25 in.) max jacket diameter
- Round jacket
- Center isolation member
- Transmission performance verified by UL
- Reverse sequential marking
- Jackets material is lead free
The Giganet Category 6 UTP cables are manufactured and tested to the TIA/EIA 568‐B.2‐1, EN50173‐1 and ISO/ IEC11801 Category 6 specifications.
Each cable consists of 8 color coded 23AWG polyethylene insulated conductors.
These are twisted together to form 4 pairs with varying lay lengths. These pairs are then formed around a central ‘X’ shaped polyethylene filler. This filler assists in maintaining and enhancing the cables performance. A jacket of UV and moisture resistant polyethylene is applied making this cable ideal for outdoor installation.
The printing detail along the outer sheath includes the cable part code, specification detail and our new 305 to 0 meter
marked system. As the cable is dispensed from the box the sequential marking counts down from 305 to 0 meters, as well as reducing waste and accounting easily for cables installed, this innovative print legend finally removes the guesswork from assessing the amount of cable remaining in partly used boxes.
Due to the risk of lightning or over‐voltage damage both ends of the external cable must be fitted with equipment suitable for protecting the computer system and operators from a direct or indirect lightning strike or other over-voltage situation. These devices are available in many forms, but are usually system specific and you will need to contact the manufacturer of these devices to ensure the requirements of the network is met.